When a Transaction Report Is PrintedXerox WorkCentre C226 System Administration Guide 6-39TroubleshootingThis chapter contains information to help you make efficient use of the fax features ofthe machine, including solutions to common problems.When a Transaction Report Is PrintedThe machine has been set to automatically print a Transaction Report when a trans-mission is not successful or when the Broadcast transmission function is used. TheTransaction Report informs you of the result of the operation. When the machine printsa Transaction Report, be sure to check the contents.The initial settings (factory settings) for printing Transaction Reports are indicated byshading below. You can use the key operator program to change the settings(See “Transaction report print select setting” on page 6-53).The Transaction Report shows the date of transmission, the time transmission began,the other party's name, the duration of the operation, the number of pages, and theresult.NOTES: • The list count appears in the "#" column of the Transaction Report and a serialnumber appears in the FILE column. (These numbers are not related to thetransaction.)• If desired, you can have part of the document printed on the transaction report.This setting is enabled in the key operator programs. (See “Original print ontransaction report” on page 6-52.)• Single sending: Print out all report / / No printedreport• Broadcasting: / Print out error report only / No printedreport• Receiving: Print out all report / Print out error report only /• Confidential reception: / Not print out notice pagePrint out error report onlyPrint out all reportNo printed reportPrint out notice page
