6-54 Xerox WorkCentre C226 System Administration GuideFax UnitActivity report print select settingThis program is used to have the activity report stored in the machine's memoryprinted out at regular intervals.You can choose to have the report automatically printed each time the number ofstored transactions exceeds 50, or have the report printed at a specified time everyday (only once per day).The report is normally set to not print out. Select "AUTO PRINT AT MEMORY FULL"to have the report automatically printed when the number of stored transactions (thecombined total of transmissions and receptions) exceeds 50.If you select the "PRINT DAILY AT DESIGNATED TIME" checkbox, "HOUR" and"MINUTE" keys will appear to the right to let you specify the time.Touch the "HOUR" and "MINUTE" keys and then set the hour by touching the andkeys. Set the minute in the same way. When finished, touch the [OK] key.NOTES: • If you only select the "PRINT DAILY AT DESIGNATED TIME" setting and thenumber of recorded transactions exceeds 50 before the specified time, each newtransaction will delete the oldest transaction (the oldest transaction will not beprinted).• The activity report can also be printed out manually (see “Printing Out Settings” onpage 6-63).Default exposure settingsThis program is used to set the default exposure level for scanning originals in fax /image send mode.This program is initially set to "AUTO". If changed to "MANUAL", the exposure levelcan be adjusted to five levels. Level 1 is the lightest level and level 5 is the darkestlevel.Key Operator ProgramsActivity Report Print Select SettingAuto Print At Memory FullPrint Daily At Designated TimeOkHour Minute13 01
