6-60 Xerox WorkCentre C226 System Administration GuideFax UnitSet the telephone number for data forwardingWhen a problem prevents the machine from printing a received fax, the transfer func-tion can be used to forward the received fax to another fax machine. Use this setting toprogram the fax number of the destination fax machine. Only one fax number can beprogrammed (maximum of 64 digits).If you wish to specify an F-code confidential memory box in the destination machine,touch the [SUB ADDRESS] key after entering the fax number to enter a slash "/", andthen enter the sub-address. Enter a passcode as well if needed. (See “Storing One-Touch Keys” in your Xerox WorkCentre C226 User Guide.)Output tray settingThis setting is used to select the output tray for received faxes. The trays that can beselected will vary depending on what peripheral devices have been installed.Anti junk fax settingThis program is used to enter fax numbers from which you wish to block fax reception.Up to 50 numbers can be entered.This program is normally disabled.To block reception from the entered fax numbers, touch the [VALID] key.Entering anti junk fax numbers1. Touch the [ENTER] key.The fax number entry screen appears.2. Enter the fax number with the numeric keys.Up to 20 digits can be entered.When you have finished entering the number, touch the [NEXT] key to store thenumber. A new number entry screen will appear. Enter the next number with thenumeric keys.3. Touch the [OK] key.Deleting an anti junk fax number1. Touch the [DELETE] key.The deletion screen will appear.2. Touch the number key that you wish to delete.A message will appear. Touch the [YES] key to delete the number.To cancel the deletion, touch the [NO] key.Key Operator ProgramsAnti Junk Fax SettingEnterDelete
