63FT-817ND Operating ManualMenu Item 21 [CW SPEED]Function: Set the sending speed for the built-in Electronic keyer.Available Values: 4wpm ~ 60 wpm/20cpm ~ 300 cpmDefault: 12 wpm (60 cpm)You can set the sending speed according to either of two units of speed (wpm: words perminute; cpm: characters per minute). To switch units between “wpm” and “cpm,” just pressthe knob.Menu Item 22 [CW WEIGHT]Function: Set the Dot:Dash ratio for the built-in electronic keyer.Available Values: 1:2.5 ~ 1:4.5Default: 1:3.0Menu Item 23 [DCS CODE]Function: Setting the DCS code.Available Values: 104 Standard DCS codesDefault: 023Menu Item 24 [DIG DISP]Function: Define the displayed frequency off-set during DIG (USER-L or USER-U) modeoperation.Available Values: –3000 ~ +3000 HzDefault: 0 HzMenu Item 25 [DIG MIC]Function: Adjust the audio input level from terminal equipment (such as a TNC or PSK-31sound card) during DIG (Digital) mode operation.Available Values: 0 ~ 100Default: 50Menu Item 26 [DIG MODE]Function: Select the mode and sideband (if applicable) in the DIG (Digital) mode.Available Values: RTTY/PSK31-L/PSK31-U/USER-L/USER-UDefault: RTTYRTTY: AFSK RTTY operation on the LSB modePSK31-L: PSK-31 operation on the LSB modePSK31-U:PSK-31 operation on the USB modeUSER-L: User-programmed costume operation based on LSB modeUSER-U: User-programmed costume operation based on USB modeIn the USER-L and USER-U modes, you can define the display frequency offsetand carrier frequency offset by menu Items #24 (DIG DISP) and #27 (DIG SHIFT).MENU O PERATIONDCS CODE023 025 026 031 032 036 043 047 051 053054 065 071 072 073 074 114 115 116 122125 131 132 134 143 145 152 155 156 162165 172 174 205 212 223 225 226 243 244245 246 251 252 255 261 263 265 266 271274 306 311 315 325 331 332 343 346 351356 364 365 371 411 412 413 423 431 432445 446 452 454 455 462 464 465 466 503506 516 523 526 532 546 565 606 612 624627 631 632 654 662 664 703 712 723 731732 734 743 754 – – – – – –