Yaesu FTDX-9000MP Operation Manual

Also see for FTDX-9000MP: Operation manual Brochure & specs Update guide Update guide Update guide

Page 115FT DX 9000MP OPERATION MANUALThe Quick Memory Bank is comprised of five memories (labeled “C1” ~ “C5”) independent from the regular and PMSmemories. These can quickly store operating parameters for later recall.QMB CHANNEL S TORAGE1. Tune to the desired frequency on the Main (VFO-A)band.2. Press the blue (QMB) STO key (# ). The “beep”will confirm that the contents of the Main (VFO-A)band have been written to the currently-available QMBmemory.If you repeatedly press the (QMB) STO key, the QMBmemories will be written in the following order:C-2 C-3 C-4 C-5 C-1Once all five QMB memories have data on them, previousdata (starting with channel C1) will be over-written on afirst-in, first-out basis.QMB CHANNEL R ECALL1. Press the (QMB) RCL key (# ). The display willindicate “QMB” and the current QMB channel’s datawill be shown on the main frequency display field.2. Repeatedly pressing the (QMB) RCL key will toggleyou through the QMB channels:C-2 C-3 C-4 C-5 C-1Press the V/M key (# ) to return to the VFO orMemory mode.AdviceRotating the MAIN Tuning Dial knob (# ), or chang-ing the operating mode, will place the transceiver in the“Memory Tune” mode, which is a temporary “pseudo-VFO” method of tuning off of a stored memory channel.If you do not over-write the contents of the current memorychannel, the original contents will not be disturbed by theinitiation of Memory Tune operation.QMB (QUICK M EMORY B ANK)QMB STO keyQMB RCL key V/M key