Yaesu FTDX-9000MP Operation Manual

Also see for FTDX-9000MP: Operation manual Brochure & specs Update guide Update guide Update guide

Page 60 FTDX9000MP OPERATION MANUALANTENNA SELECTIONFour main antenna jacks, available for both transmission and reception, are provided on the rear panel of the transceiver.What’s more, a receive-only jack is provided, and the incoming signal path may also have a special after-market filter orpreamplifier inserted, if desired, with one-touch access.Selection of the desired TX/RX antenna is accomplishedby pressing the appropriate 1 ~ 4 Antenna Selectionswitch (# ) on the front panel.To engage the RX-only antenna, press the RX switch(# ) within the Antenna Selection switch group on thefront panel. The RX-only antenna must be connected tothe corresponding “RX ANT” antenna jack on the rearpanel.The antenna currently selected for use on the Main (VFO-A) band will be designated by a Red LED.The antenna currently selected for use on the Sub (VFO-Bband will be designated by an Umber LED.If both the Main (VFO-A) and Sub (VFO-B) bands areutilizing the same antenna, both the Red and Umber LEDswill light up on the same antenna location.ANTENNA SWITCH(VFO-A)ANT “1”ANT “3”ANT “2”ANT “4”RX ANTRX OUT(MAIN)RX OUT(SUB)ANTENNA SWITCH(VFO-B) RX ANTENNA SWITCH(VFO-B)RX ANTENNA SWITCH(VFO-A)TX/RX RELAYTransmitterSectionMAIN (VFO-A)ReceiverSUB (VFO-B)ReceiverBPFCONVENIENT F EATURESANTENNA SELECT Switch