Special features4-2123456789101112Setting the traction control systemWith the throttle closed, push thisswitch down to change from TCS “1” toTCS “2”. Push up to change from “2” to“1”.With the vehicle stopped, push thisswitch up for two seconds to turn thesystem off. Push down to turn the sys-tem on.TIP The current TCS setting is shownin the TCS display (page 5-10). Traction control can be turned onor off only when the vehicle isstopped. When the key is turned to “ON”,traction control is turned on andset to “1” or “2” (whichever was lastselected). Turn the traction control system offto help free the rear wheel if the ve-hicle gets stuck in mud, sand, orother soft surfaces.TCS “OFF”TCS “OFF” turns the traction controlsystem off.TCS “1”TCS “1” minimizes traction control sys-tem assist.TCS “2”TCS “2” maximizes traction control as-sist; wheel spin is most strongly con-trolled.The “ ” indicator light flashes whentraction control has engaged. You maynotice slight changes in engine and ex-haust sounds when the system has en-gaged.When the traction control system hasbeen set to “OFF”, the “ ” indicatorlight will come on.NOTICEECA16801Use only the specified tires. (Seepage 8-19.) Using different sizedtires will prevent the traction controlsystem from controlling tire rotationaccurately.1. Traction control system switch “TCS”11. Traction control system indicator light“ ”2. Engine trouble warning light “ ”1 2
