Yamaha MTN850-AH Owner's Manual

Contents

Instrument and control functions5-7123456789101112all, use extra caution to avoid possi-ble wheel lock during emergencybraking. Have a Yamaha dealercheck the brake system and electri-cal circuits as soon as possible.EAU77001Traction control system indicatorlight “ ”In normal operation, this indicator lightflashes when traction control has en-gaged.When the traction control system hasbeen turned off (page 4-1), this indica-tor light will come on.If the traction control system becomesdisabled while riding, this indicator lightand the engine trouble warning light willcome on.EAU76411Quick shift indicator light “ ”When the key is turned to “ON”, thequick shift system (page 4-3) turns onand this indicator light comes on.If a problem is detected in the quickshift system, this light will turn off andthe quick shift system will be unavail-able. Have a Yamaha dealer check thevehicle.EAU73120Immobilizer system indicator light“ ”When the key is turned to “OFF” and 30seconds have passed, the indicatorlight will flash steadily to indicate the im-mobilizer system is enabled. After 24hours have passed, the indicator lightwill stop flashing, however the immobi-lizer system is still enabled.The electrical circuit of the indicatorlight can be checked by turning the keyto “ON”. The indicator light shouldcome on for a few seconds, and thengo off.If the indicator light does not come oninitially when the key is turned to “ON”,if the indicator light remains on, or if theindicator light flashes in a pattern (if aproblem is detected in the immobilizersystem, the immobilizer system indica-tor light will flash in a pattern), have aYamaha dealer check the vehicle.TIPIf the immobilizer system indicator lightflashes in the pattern, slowly 5 timesthen quickly 2 times, this could becaused by transponder interference. Ifthis occurs, try the following.1. Make sure there are no other im-mobilizer keys close to the mainswitch. Other immobilizer systemkeys may cause signal interfer-ence and prevent the engine fromstarting.2. Use the code re-registering key tostart the engine.3. If the engine starts, turn it off, andtry starting the engine with thestandard keys.4. If one or both of the standard keysdo not start the engine, take thevehicle and all 3 keys to a Yamahadealer to have the standard keysre-registered.