Periodic maintenance and adjustment8-35123456789101112TIPTo access the fuel injection systemfuse, remove the starter relay cover bypulling it upward.If a fuse is blown, replace it as follows.1. Turn the key to “OFF” and turn offthe electrical circuit in question.2. Remove the blown fuse, and theninstall a new fuse of the specifiedamperage. WARNING! Do notuse a fuse of a higher amperagerating than recommended toavoid causing extensive dam-age to the electrical system andpossibly a fire.[EWA15132]3. Turn the key to “ON” and turn onthe electrical circuit in question to1. Radiator fan motor fuse2. Backup fuse3. Electronic throttle valve fuse4. Terminal fuse 15. ABS solenoid fuse6. ABS motor fuse7. Spare fuse12347561. Starter relay cover2. Fuel injection system fuse3. Fuel injection system spare fuse123Specified fuses:Main fuse:50.0 AAuxiliary fuse 1:2.0 ATerminal fuse 1:2.0 AGrip warmer fuse:5.0 AHeadlight fuse:10.0 ASignaling system fuse:7.5 AIgnition fuse:15.0 AParking lighting fuse:7.5 ARadiator fan motor fuse:15.0 AABS motor fuse:30.0 AABS solenoid fuse:15.0 AFuel injection system fuse:10.0 AABS control unit fuse:7.5 ABackup fuse:7.5 AElectronic throttle valve fuse:7.5 A