Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

AV1 AV2RGB 1 RGB 2AV3MUTE VOLVOLAV4AUTO PinPOKSIZE RECALLMENUID ID SET9ENGLISHRemote controlID SET button16POWER OFF button 13POWER ON button 13POWER ON/OFF button13MENU button 16MUTE button 14 VOLUME UP/DOWN buttons14RETURN button16RECALL button15AUTO button 16PinP button 34ID button 16SELECT/ADJUST buttons16OK button 16Loading Batteries1. Open the battery cover.• Slide back and remove the batterycover in the direction of the arrow.2. Load the batteries.• Load the two Size AA batteries included, matching polaritymarkings on the batteries to those onthe case.3. Close the battery cover.• Replace the battery cover in the direction of the arrow and snapit back into place.Use the remote control within about 5 m from the front of the unit,within a 30 degree arc either side of the remote control sensor.With in 30degreesAbout 5mAbout 3mWith in 30degreesAbout 3mAV1 AV2RGB 1 RGB 2AV3MUTE VOLVOLAV4AUTO PinPOKSIZE RECALLMENUID ID SETCAUTION• Do not use new and old batteries together. The batteries couldexplode or leak, resulting in fires, physical injury, or stains.• When loading batteries, observe their correct polarities asmarked on the product. If loaded in the wrong direction, thebatteries could explode or leak, resulting in fires, physical injury,or stains.ATTENTION• Do not drop exert undue force on the remote control.• To avoid possible failures. Do not splash the remote control withwater or put it on a wet object.• It you do not intend to use the remote control for an extendedperiod of time, remove the batteries from it.• If the remote control begins to lack responsiveness, replace thebatteries.• Strong light such as direct sunlight impinging on thephotoreceptor of the remote control can cause operationalfailure. Position this unit to avoid direct contact with such light.Handling the Remote ControlSIZE button15RGB/VIDEO buttons 14COMPONENT NAMES (continued)