Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

52OPERATING INSTRUCTIONS (continued)SETUP MENU (continued)[During VIDEO signal input]1 item is added to the Menu shown in the page .39Selected characters Setup hintScart Output TV MonitorTV:AV4 (Scart) output will be fixed as TV signal output.Monitor:AV4 (Scart) output can view the same image as displayed onthe main unit. It is possible to monitor only the composite video signalfrom AV1, AV2, or AV3 input that is displayed on the screen at the time.• If Descrambler is set to On, it will be fixed as TV automatically.Selected characters Setup hintAuto TuningCountry (Page1) (Page2) (Page3)Select the country name using the SELECT buttons and pressOK button.• If some required stations could not be preset using the auto tuningfunction, select and preset the required station in the requiredposition using the manual tuning operation.Search – – Press the OK button and it starts the auto tuning.Manual TuningPosition 1 2 3••••••199 AV00 Set the position number. This also can be set by PROGRAMUP/DOWN buttons.Search(C--)(S--)(--MHz)– – Select the channel entry method. Enter a two digit channel number(CH), a two digit S-band number, or a 3 digit frequency (MHz).– – Use the 0-9 NUMBER buttons to enter a two digit number. If the numberis a standard channel number, the unit begins searching for the channel.– – Use the 0-9 NUMBER buttons to enter a two digit number. If the numberis a standard S-band number, the unit begins searching for the channel.– – Use the 0-9 NUMBER buttons to enter a three digit number. If the numberis a standard frequency, the unit begins searching for the channel.Descrambler Off On Set this to Off normally. If it is set to On, the AV4 (Scart) terminaloperates as TV signal input, and the screen changes to display AV4(Scart) input signal automatically.Name ( :a letter)This is used to input a 5 digit name for a TV station. After fixing thecursor on the first digit, select a letter by SELECT buttons andmove to the next digit by ADJUST button. Press the OK buttonagain when finished.• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),”,”(comma) and ”.”(period) .Sound System BG I DKL' L Select one of 5 different settings for the sound system.Colour System Auto PAL SECAMNTSC3.58 NTSC4.43 Select one of 5 different settings for the colour system.Skip Off On If this is set to On, the selected position will be skipped whileselecting positions by PROGRAM UP/DOWN buttons.This is automatically set to On for non-broadcasting channels.NR Off On If this is set to On, it helps to reduce the noise interference visible onthe screen, especially in weaker signal reception areas.Fine Tuning Decreasing the frequencydata for the main tunerIncreasing the frequencydata for the main tuner.After completing fine-tuning, press the RETURN button to exit thismode.• The variable range is -56 ~ +56.Sort(Position listdesignated rows) – –Move the cursor to the row of the channel you wish to change, and pressthe OK button. The display characters change to green. Use the SELECT buttons to move the row to the disired location, and press theOK button when you have finished. Press the RETURN button to exit.Auto Off Off On If this is set to On, the power will be turned off when there is notransmission signal and no operation for about 10 minutes in the TVmode.