Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

36OPERATING INSTRUCTIONS (continued)PICTURE MENU (continued)Selected characters Setup hintPicture Mode Dynamic Natural Dynamic: This setting is best for very bright ambient lighting.Natural: This setting is for normal lighting conditions.Contrast Narrows the gap betweenbrightness and darkness.Broadens the gap betweenbrightness and darkness.Adjust for maximum visibility to suit the ambient brightness.This can be adjusted further till [+40] by pressing and holdingcursor button at [+31]. The color for [+32] to [+40] numbers will changefrom white to magenta. This special mode is better for dark scenes.For normal viewing we recommend that the Contrast is set to [+31]."Panel Life" in the Function Menu should be set to Normal when thisContrast setting is adjusted.Brightness Black is subdued forincreased overall darkness.Black is set off for increasedoverall brightness.Adjust to taste.Colour Darkens colours. Lightens colours. Adjust to taste.Sharpness Soft Sharp Normally set to Centre position. Shift to the minus (-) side for a softereffect and plus (+) for a sharper picture.Hue Enhances red and weakensgreen.Enhances green and weakensred.This is adjustable when receiving PAL/SECAM signal.Then the character will be grayed out.Adjust for most realistic skin colour.Colour Temperature Cool Normal Warm Black / White Normally set to Cool.Contrast Mode Normal Auto DynamicDynamic:Emphasizes the differences between video shadings toimprove the feeling of contrast.Normal : The gradation of an image is reproduced as faithfully aspossible.Auto:Detects image brightness and automatically adjusts for naturalbrightness.Reset (Selects the Reset mode) The original factory settings for the items of this Menu page can berestored by pressing the OK button.YNR Off Low High Performs picture signal noise reduction. Turn up to reduce noise.CNR Performs colour signal noise reduction. Turn up to reduce noise.It will be fixed as Off only when selecting DVI-STB mode.Film Mode Off OnOn:Automatically detects the movie film material and faithfullyreproduces the original film image.Off:Set to OFF when switching between images does not appearnatural.PAL Comb Filter Off On This is available only when receiving a PAL composite signal. Turn Onto reduce the discolorations in fine picture detail and provide purercolour.LTIOff Low Middle HighAdjusts the sharpness of the picture signal.CTI Adjusts the sharpness of the colour signal.Black Enhancement Adjusts the black level compensation.Auto Colour Off OnThis is available only when receiving an NTSC composite/S.Videosignal. This monitors and adjusts the colour to maintain constantcolour levels. It also maintains natural flesh tones while preservingfidelity of background colours.Colour Temp. Adjustment Off On Turn On when you wish to change colour temperature depending onthe user’s preference.Amplitude Red Brighter scenes aredecreased in reddish colour.Brighter scenes are increasedin reddish colour.Adjust colour temperature depending on the user’s preference. Thesesettings are independently stored in each of the 4 Colour Temperaturemodes.Green Brighter scenes aredecreased in greenish colour.Brighter scenes are increasedin greenish colour.Blue Brighter scenes aredecreased in bluish colour.Brighter scenes are increasedin bluish colour.Cut Off Red Dark scenes are decreased inreddish colour.Dark scenes are increased inreddish colour.Green Dark scenes are decreased ingreenish colour.Dark scenes are increased ingreenish colour.Blue Dark scenes are decreased inbluish colour.Dark scenes are increased inbluish colour.