41EnglishADVANCEDOPERATION 1B MAIN (main speaker mode)Choices: LARGE, SMALLLARGESelect this if you have large main speakers. The unitdirects the entire range of the main left and right channelsignals to the main left and right speakers.SMALLSelect this if you have small main speakers. The unitdirects the low-frequency signals (90 Hz and below) ofthe main channel to the speakers selected with “1DBASS”. 1C REAR LR (rear speaker mode)Choices: LRG (large), SML (small), NON (none)LRGSelect this if you have large rear left and right speakers orif a rear subwoofer is connected to the rear speakers. Theentire range of the rear channel signal is directed to therear left and right speakers.SMLSelect this if you have small rear left and right speakers.The low-frequency signals (90 Hz and below) of the rearchannel are directed to the speakers selected with “1DBASS”.NONSelect this if you do not have rear speakers.y• This unit is set in the virtual CINEMA DSP mode when youselect NON for “1C REAR LR”. 1D BASS (bass out mode)LFE signals carry low-frequency effects when this unitdecodes a Dolby Digital or DTS signal. Low-frequencysignals are defined as 90 Hz and below. The Low-frequency signals can be directed to both main left andright speakers, and to the subwoofer (subwoofer can beused for both stereo reproduction and the DSP program).Choices: SWFR (subwoofer), MAIN, BOTHSWFRSelect this if you use a subwoofer. The unit directs theLFE signals to the subwoofer.MAINSelect this if you do not use a subwoofer. The unit directsLFE signals to the main speakers.BOTHThe unit directs LFE signals to the subwoofer. Low-frequency signals designated to the main channels inaccordance with other speaker mode settings are directedto both main speakers and the subwoofer.Note• When you select MAIN for “1D BASS”, the unit directs thelow-frequency signals (90 Hz and below) of the main channelto the main speakers even if you select SMALL for the mainspeaker mode.SET MENU
