MAINTENANCE SPECIFICATIONS2 - 15SPECPart to be tightened Thread size Q’ty Tightening torqueNm m·kg ft·lbNipple (spoke) — 72 3 0.3 2.2Rear wheel sprocket M8 × 1.25 6 50 5.0 36Rear brake disc cover M6 × 1.0 2 7 0.7 5.1Rear brake caliper protector M6 × 1.0 2 7 0.7 5.1Drive chain puller adjust bolt and locknut M8 × 1.25 2 16 1.6 11Engine mounting:Engine and engine bracket (front) M10 × 1.25 1 69 6.9 50Engine and frame (lower) M10 × 1.25 1 69 6.9 50Engine bracket and frame M8 × 1.25 6 34 3.4 24Engine and engine bracket (upper) M10 × 1.25 1 55 5.5 40Lower engine guard M6 × 1.0 3 10 1.0 7.2Left engine guard M8 × 1.25 2 23 2.3 17Right engine guard M8 × 1.25 2 23 2.3 17Regulator bracket and frame M6 × 1.0 2 7 0.7 5.1Regulator M6 × 1.0 2 7 0.7 5.1Pivot shaft and nut M16 × 1.5 1 85 8.5 61Relay arm and swingarm M14 × 1.5 1 80 8.0 58Relay arm and connecting rod M14 × 1.5 1 80 8.0 58Connecting rod and frame M14 × 1.5 1 80 8.0 58Rear shock absorber and frame M10 × 1.25 1 56 5.6 40Rear shock absorber and relay arm M10 × 1.25 1 53 5.3 38Rear frame (upper) M8 × 1.25 1 32 3.2 23Rear frame (lower) M8 × 1.25 2 29 2.9 21Swingarm and brake hose holder M5 × 0.8 4 1 0.1 0.7Swingarm and patch M4 × 0.7 4 2 0.2 1.4Upper drive chain tensioner M8 × 1.25 1 19 1.9 13Lower drive chain tensioner M8 × 1.25 1 20 2.0 14Drive chain support M6 × 1.0 3 7 0.7 5.1Seal guard and swingarm M5 × 0.8 4 6 0.6 4.3Fuel tank M6 × 1.0 2 10 1.0 7.2Fuel cock M6 × 1.0 2 7 0.7 5.1Seat set bracket and fuel tank M6 × 1.0 1 7 0.7 5.1Hooking screw (fitting band) and fuel tank M6 × 1.0 1 7 0.7 5.1Fuel tank bracket and fuel tank M6 × 1.0 4 7 0.7 5.1Air scoop and fuel tank M6 × 1.0 6 6 0.6 4.3Air scoop and radiator guard (lower) M6 × 1.0 2 6 0.6 4.3Front fender M6 × 1.0 4 7 0.7 5.1Rear fender (front) M6 × 1.0 2 7 0.7 5.1Rear fender (rear) M6 × 1.0 2 11 1.1 8.0Side cover M6 × 1.0 2 7 0.7 5.1Seat M8 × 1.25 2 23 2.3 17Trip meter M6 × 1.0 2 7 0.7 5.1Meter cable holder and front fork protector M5 × 0.8 2 4 0.4 2.9
