Yealink SIP-T2xP Administration Manual

Also see for Yealink SIP-T28P: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T2xP Administration Manual Manual pdf 239 page image

Appendix227This section provides the sample configuration file necessary to configure the IP phone.Any line starts with a pound sign (#) is considered to be a comment, unless the # iscontained within double quotes. For Boolean fields, 0 = disabled, 1 = enabled.This file contains sample configurations for the .cfg or .cfg file.The parameters included here are examples only. Not all possible parameters areshown in the sample configuration file. You can configure or comment the values as yourequired. The settings in the .cfg file will be overridden by settingswhich also appear in the .cfg file.T2xP Sample Configuration File#!version:1.0.0.1#Note: This file header cannot be edited or deleted.#Network Settingsnetwork.internet_port.type =#Configure the WAN port type; 0-DHCP, 1-PPPoE, 2-Static IP Address.#If the WAN port type is configured as DHCP, you do not need to set the#following network parameters.#If the WAN port type is configured as Static IP Address, configure the#following parameters.network.internet_port.ip =network.internet_port.mask =network.internet_port.gateway =network.primary_dns=network.secondary_dns =#If the WAN port type is configured as PPPoE, configure the following#parameters.network.pppoe.user =network.pppoe.password =#Dial Plan Settingsdialplan.area_code.code =dialplan.area_code.min_len =dialplan.area_code.max_len =dialplan.area_code.line_id =dialplan.block_out.number.1 =dialplan.block_out.line_id.1 =dialnow.item.1 =dialplan.item.1 =