Yealink SIP-T2xP Administration Manual

Also see for Yealink SIP-T28P: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T2xP Administration Manual Manual pdf 49 page image

Configuring Basic Features372. Select the desired type from the pull-down list of Return Code When DND.3. Click Confirm to save the change.To configure the DND key mode via web user interface:1. Click on Phone->Features->DND>>.2. Select the desired mode in the DND Key Mode field.3. Click Confirm to save the change.Call Hold ToneThe call hold feature allows you to place an active call on hold while you want to initiateor answer a second call. The line LED flashes green and the IP phone plays a warningtone at regular intervals to remind you that there still has a call on hold. You can set theinterval for the IP phone to play hold tone. When the play hold tone feature is disabled,the IP phone will not play a warning tone when there is a call on hold.Call Hold MethodThe IP phone supports two SIP call hold methods. One is according to RFC 2543, settingc=0.0.0.0, the other is according to RFC 3261, setting c=IP address. The IP phone usesRFC 3261 to request the remote party to stop sending media by default.ProcedureCall hold can be configured using the configuration files or locally.Configuration File .cfgConfigure the call hold tone andcall hold tone delay features.Specify whether to use RFC 2543(c=0.0.0.0) when outgoing holdsignaling.For more information, refer to CallHold on page 117.Local Web User InterfaceConfigure the call hold tone andcall hold tone delay features.Specify whether to use RFC 2543(c=0.0.0.0) when outgoing holdsignaling.Navigate to:http:///cgi-bin/ConfigManApp.com?Id=6