Yealink SIP-T2xP Administration Manual

Also see for Yealink SIP-T28P: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T2xP Administration Manual Manual pdf 58 page image

Administrator’s Guide for SIP-T2xP IP Phones46n/ConfigManApp.com?Id=21For more information, refer toSIP-T2xP User Guide.Phone User InterfaceConfigure the hotline numberand delay time.For more information, refer toSIP-T2xP User Guide.User can access the web user interface of the IP phone using the HTTP and HTTPSprotocols. You can configure the access type of the web server. The available optionsare: Disabled, HTTP & HTTPS, HTTP Only and HTTPS Only. The web server type is HTTP &HTTPS by default. You cannot use the web user interface of the phone when the webserver type is configured to Disabled. You can specify the HTTP port and HTTPS port ofthe web server.Web server type can be configured using the configuration files or locally.Configuration File .cfgSpecify the access type, HTTPport and HTTPS port of the webserver.For more information, refer toWeb Server Type on page 132.Local Web User InterfaceSpecify the access type, HTTPport and HTTPS port of the webserver.Navigate to:http:///cgi-bin/ConfigManApp.com?Id=19Caller ID Presentation service allows the IP phone to display the caller’s name andnumber, derived from a SIP header contained in the INVITE message. The IP phonesupports displaying three types of SIP headers (From, P-Asserted-Identity andRemote-Party-ID). Identity presentation bases on the content contained in the relevantSIP header. The presentation of the caller identity is configurable on a per-accountbasis.If the caller has existed in the directory, the local name assigned to the caller may bepreferentially displayed.