Yealink SIP-T2xP Administration Manual

Also see for Yealink SIP-T28P: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T2xP Administration Manual Manual pdf 46 page image

Administrator’s Guide for SIP-T2xP IP Phones34When you are in an active call, the call waiting feature notifies you of the newincoming call, and presents the incoming call visually on the phone LCD screen. If thecall waiting feature is disabled, the new incoming call will be automatically rejectedby the IP phone with a busy message.NoteCall Waiting ToneYou can also enable or disable the playing of a short ―Call Waiting Tone" when there isan incoming call on your IP phone. This feature is enabled by default. If you have CallWaiting Tone enabled, and a call comes into the IP phone when you are in an active call,a tone is audible to notify you of that incoming call. The Call Waiting Tone feature worksonly if the Call Waiting feature is enabled.ProcedureCall waiting and call waiting tone can be configured using the configuration files orlocally.Configuration File .cfgConfigure the call waiting andcall waiting tone features.For more information, refer to CallWaiting on page 115.Local Web User InterfaceConfigure the call waiting andcall waiting tone features.Navigate to:http:///cgi-bin/ConfigManApp.com?Id=6To configure the call waiting via web user interface:1. Click on Phone->Features->General Information >>.2. Select the desired value from the pull-down list of Call Waiting.3. Click Confirm to save the change.To configure the call waiting tone via web user interface:1. Click on Phone->Features->Audio Settings>>.2. Select the desired value from the pull-down list of Call Waiting Tone.3. Click Confirm to save the change.If the call waiting feature is disabled and the IP phone is in an active call, the MissedCalls list does not get updated with details of incoming calls.