| Wireless Network | 78Related tasksActivating the Wi-Fi ModeConnecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks which canautomatically configure a wireless network with a network name (SSID) and strong WPA data encryption andauthentication.About this taskTwo methods supported by Yealink IP phones in the Wi-Fi protected setup:• Push Button Configuration (PBC): The user simply presses WPS key on both the IP phone and gateway/routerto connect.• Personal Identification Number (PIN): The user has to enter a PIN generated randomly by the IP phone on thegateway/router to connect.• Connecting to the Wireless Network Using PBC• Connecting to the Wireless Network Using PINConnecting to the Wireless Network Using PBCBefore you beginMake sure Wi-Fi Mode is enabled.Procedure1. Navigate to Menu > Setting > Basic > Wi-Fi.2. Tap More > WPS.The phone screen prompts that you need to press the Wi-Fi Protected Setup button on your router.3. Long press the WPS key on your gateway/router.Once WPS setup has completed successfully, the touch screen will prompt connect successfully.Related tasksActivating the Wi-Fi ModeConnecting to the Wireless Network Using PINBefore you beginMake sure that the Wi-Fi mode is activated.Procedure1. Navigate to Menu > Setting > Basic > Wi-Fi.2. Tap More > WPS-PIN.The phone screen prompts that you need to enter the PIN xxx on your WLAN router.3. Log into your gateway/router’s web interface, and configure it to search the clients.Once WPS-PIN setup completes successfully, the web interface of gateway/router will prompt success.Related tasksActivating the Wi-Fi Mode