| Using Better Together over Ethernet | 85Starting the Yealink BToE ConnectorYou can start the Yealink BToE connector manually if it does not start automatically.ProcedureClick the Yealink BToE Connector desktop icon on your computer or clickStart > All Programs > Yealink BToEConnector.Setting the Yealink BToE ConnectorYou can customize settings for the Yealink BToT connector.Procedure1. Right-click in the system tray, and click Settings.2. Do one of the following:• Check the Run automatically when starting Windows checkbox, this software starts automatically once thePC starts.• If you uncheck the Wired checkbox, you need to enter the IP address of your phone manually.• If you check the Wired checkbox, and you connect a computer to the PC port on your phone using anEthernet cable, the IP address of your phone is entered automatically.Pairing Your Phone with Your ComputerBefore you can begin using BToE, you must pair your phone with your computer.• Enabling BToE and Selecting a Paring Mode• Pairing Your Phone with Your Computer over Ethernet• Pairing Your Phone with Your Computer Using Phone IP Address• Viewing Pairing StatusEnabling BToE and Selecting a Paring ModeBy default, your phone is set to pair with your computer automatically when Better Together over Ethernet is enabledand you connect your phone to your computer over Ethernet. You can also choose to manually pair your phone withyour computer using the BToE Connector application and a pairing code generated by your phone. Manual pairingensures user information security and prevents anyone from pairing with the phone.Procedure1. Navigate to Menu > Setting > Features > BToE.2. Turn on BToE.3. In the BToE Pairing Mode field, select Auto or Manual.4. Save the change.
