Zeiss LSM 510 Operating Manual

Also see for LSM 510 Inverted: Quick guide Operating manual User guide User manual Brief Operating Manual

QUICKSTART LSM 510Carl Zeiss Quick Start in the Expert Mode LSM 510 META4-16 B 45-0008 e 10/024.3.3 Turn on the LasersThis step is used to switch the lasers and set the intensity.• Click on the Laser button in the Acquiresubordinate toolbar of the Main menu.− A Laser Control window with a list ofavailable lasers will appear. Depending onthe lasers available in your system, yourscreen may differ from the one displayed.• Using the mouse, click on the laser(s) featuringthe appropriate wavelength to excite the dyesused to label your specimen.• In the case of the argon and UV laser(Enterprise), click on the Standby button first.− Warming Up appears in the line Status.− After 2 minutes, when the warming-upphase is finished, the Ready messageappears.• Then click on the On button.− The laser is switched on.• Use Output [%] scrollbar to set the intensity to 50 %.• In the case of the HeNe laser, click on the On button directly.• Close the window with the Close button.• For precise measurements the system should warm up for 2 hours.• Depending on the lasers available in your system, your screen may differ from the one displayed.Fig. 4-14 Laser Control window