126 CHAPTER 5: A NALOG DEVICESVerifying AnalogTerminal Card PortsAfter you have used the Auto Discover feature to add an Analog TerminalCard, you can verify that the card is properly installed by using the NBXNetSet utility, described next, and by examining the status lights on thefront of the card, which are described on page 127.Using the NBX NetSetUtilityTo verify the proper installation of an Analog Terminal Card using the NBXNetSet utility:1 In the NBX NetSet - Main Menu window, click Device Configuration.2 In the Device Configuration dialog box, click the ATA tab. (See Figure 43.)Figure 43 ATA Tab3 Compare the MAC addresses or port numbers that appear in the list tothe MAC address and port numbers you recorded before you inserted thiscard.The four ports of the Analog Terminal Card appear in the list of ATAs,along with the ports of any previously discovered Analog Terminal Cards,and any Analog Terminal Adapters (ATAs).Each of the four ports on an Analog Terminal Card has a MAC address.For the 3C10114 card, the MAC address is based on, but not identical to,the MAC address of the card. Table 22 shows a sample set of MACaddresses for an Analog Terminal Card and the ports on the card. For the
