Using Auto Discover for Initial System Configuration 913 Either browse to the install folder on the NBX Resource Pack CD andselect the language (.taz file) that you want, or type the path in the textbox.4 Click Upgrade.After you install the regional software and components, you must enablethe language. That is, you must make your preferred language thecurrent language on the NBX system. For more information, see the NBXAdministrator’s Guide, or use the NBX NetSet utility to go to SystemConfiguration > System Settings > Regional Settings and then click Help.UsingAuto Discover forInitial SystemConfigurationUsing the Auto Discover feature simplifies initial system configuration byadding information about new devices to the configuration database.“Devices” include telephones, Analog Line Cards, Digital Line Cards,Analog Terminal Adapters, 3Com Attendant Consoles, and “virtualdevices” such as the pcXset Soft Telephone and the ConneXtions H.323Gateway.After a device has been discovered, the Auto Discover process does notfind that device again. To remove a device from the system, you must usethe NBX NetSet utility to manually remove the device and its databaserecord.Licensed devices, such as the 3102 Business Telephone, 3101 and 3101SPBasic Telephones, and the 3105 Attendant Console will not be discovereduntil after you have entered the device license.Table 12 Regional Software Status ValuesStatus DescriptionIn Use All of the components associated with the language andcountry are installed and at least one (voice prompts, tonesand cadences, or documentation) has been selected for use.Available for Use All of the components associated with the language andcountry are installed, but none of them are currently selectedfor use.Not Fully Installed One or more of the components associated with the languageand country are either not installed, or the wrong version of atleast one component is installed.Error while Loading One or more of the files associated with a component aremissing. This situation should never occur.
