78 CHAPTER 2: INSTALLING SYSTEM HARDWARE COMPONENTSYou are now ready to establish network/LAN Connectivity. See“Configuring NBX System Networking” next.Configuring NBXSystem NetworkingConfiguring the networking for the NBX system involves these steps:■ Establishing IP Connectivity■ Modifying Default IP Settings■ Establishing LAN Connections■ Configuring IP Addresses for Your LANFlash codes indicate disk problem:■ 2 flashes: No valid disk (system is halted)■ 3 flashes: Two valid disks, but they are notpaired (system is halted)■ 4 flashes: Configuration problem (system ishalted)■ 5 flashes: Two disks present, but nomirroring licenseN/A Flashing Flashing OnUsing disk 0 (zero) only N/A On Off OnUsing disk 1 only N/A Off On OnSynchronizing — disk 0 is valid, disk 1 isbecoming a fully mirrored disk. LED 3 flash rateindicates progress.If LED 3 stops normal flashing and intermittentlyflashes twice, the mirroring process has failed.N/A On Flashing OnSynchronizing — disk 1 is valid, disk 0 isbecoming a fully mirrored disk. LED 2 flash rateindicates progress.If LED 2 stops normal flashing and intermittentlyflashes twice, the mirroring process has failed.N/A Flashing On OnLED 2 and LED 3 flash alternately: the two disksare resynchronizingN/A Flashing Flashing OnSynchronized N/A On On OnTable 9 SS3 NBX Disk LED States (continued)Explanation LED 1 LED 2 LED 3 PWR
