NBX BRI-ST Digital Line Card 179NBX BRI-ST DigitalLine CardThe BRI-ST Digital Line Card (Table 36) enables you to connect a BRI-STline to the SuperStack 3 NBX system or the NBX 100 system.NBX E1 and T1Digital Line CardsThe E1 and T1 Digital Line Cards (Table 37) enable you to connect an E1or T1 line to the SuperStack 3 NBX system or the NBX 100 system.NBX Hub Card The NBX Hub Card (Table 38) has been replaced by the NBX Uplink Card.NBX Uplink Card The uplink card (Table 39) is an optional component.Table 36 3C10164-ST BRI-ST Digital Line Card SpecificationsWeight 455 gm (1 lb)Connectors Four RJ-45 connectors (one for each BRI-ST line) and oneserial diagnostic portEnvironmental Ambient temperature: 0 °C to 40 °C (32 °F to 104 °F)Humidity: 5% to 85% noncondensingTable 37 3C10165D E1 and 3C10116D T1 Digital Line Card SpecificationsWeight 397 gm (14 oz)Connectors One RJ-45 connector for 10BASE-T lineOne RJ-45 connector for T1/E1 lineSerial port (CONSOLE) for diagnostic accessEnvironmental Ambient temperature: 0 °C to 40 °C (32 °F to 104 °F)Humidity: 5% to 85% noncondensingTable 38 3C10115 NBX Hub Card SpecificationsWeight 397 gm (14 oz)Connectors Eight RJ-45 connectors for 10BASE-T linesOne BNC male connector for 10BASE2 coaxial lineEnvironmental Ambient temperature: 0 °C to 40 °C (32 °F to 104 °F)Humidity: 5% to 85% noncondensingTable 39 3C10370 NBX Uplink Card SpecificationsWeight 397 gm (14 oz)Connectors Eight RJ-45 connectors for 10BASE-T lines
