160 CHAPTER 8: PSTN G ATEWAY CONFIGURATIONModifying aLine Card PortYou can modify a line card port that is already configured.To modify a line card port:1 Click PSTN Gateway Configuration > Analog Line Cards.2 Click the extension of line card port that you want to modify.3 Specify the port information. See the online Help for more information.4 Click OK.Removing aLine Card PortWhen you remove a line card port that is already configured, you removethe port information from the system database.Mapped to a button on theReceptionist’s Telephone (orto a button on an AttendantConsole associated with theReceptionist’s telephone)500 Receptionist’s telephone rings. If no one answers, the call transfersto the Automated Attendant.NOTE: The call coverage point defined for the receptionist’stelephone has no affect.The transfer occurs after the number of seconds specified in theTime Out field for the appropriate time of day (Open, Closed,Lunch, Other). Click PSTN Gateway Configuration > Analog LineCards and click an extension.Mapped to a button on auser telephone (or to abutton on an AttendantConsole associated with theuser’s telephone)Extension of theReceptionistUser telephone rings. If no one answers, the call transfers to theReceptionist’s telephone.The transfer occurs after the number of seconds specified in theTime Out field for the appropriate time of day (Open, Closed,Lunch, Other). Click PSTN Gateway Configuration > Analog LineCards and click an extension.If the receptionist’s telephone is not answered, the call transfers tothe call coverage point defined for the receptionist’s telephone.Mapped to a button on auser telephone (or to abutton on an AttendantConsole associated with theuser’s telephone)500 User telephone rings. If no one answers, the call transfers to theAutomated Attendant.The transfer occurs after the number of seconds specified in theTime Out field for the appropriate time of day (Open, Closed,Lunch, Other). Click PSTN Gateway Configuration > Analog LineCards and click an extension.Table 35 Auto Extension Configuration (continued)Button Mapping Settingfor This LineAuto ExtensionSetting Incoming Call Behavior
