System-level Troubleshooting 437Configuration andStatus ReportsYou can obtain the status of all Digital Line Cards in the system witheither of these two methods:Select PSTN Gateway Configuration > Digital Line Cards and:■ Click Config & Status Report, which displays a formatted report withheadings shown in a larger font in the window.■ Click Export Report, which displays an unformatted report in thewindow. To save the report as an ASCII text file, select Save as fromthe File menu of your browser.Table 83 describes in alphabetical order (not the order of appearance) theheadings in the Configuration and Status Report.Table 82 3C10165D and 3C10116D Status Lights and Error ConditionsStatus Light PurposeCO Green: There are no error or alarm conditions.Amber: An alarm condition at the remote end or the CO isnot connected or available. To determine which alarm stateexists:1 Log on to the NBX NetSet utility using the administrator IDand password.2 Click PSTN Gateway Configuration > Digital Line Cards.3 In the Select Device Type list, select T1 Spans or ISDN PRISpans, and then click Apply.4 Select the span you want and click Status. The words RedAlarm or Blue Alarm appear in the Status field.Table 83 Configuration and Status Report HeadingsHeading Description#Chs Number of channels.#Dsp Number of digital signal processors.#OffChs Number of channels in the offline state.#OnChs Number of channels in the online state.AEClosed Autoattendant extension when business is closed.AELunch Autoattendant extension when business is at lunch.AEOpen Autoattendant extension when business is open.AEOther Autoattendant extension for Other hours.
