302 CHAPTER 11: DIAL PLANFigure 18 Dial Plan Entries for International Long DistanceDial PlanConfigurations andVPIMWith Voice Profile for Internet Mail (VPIM), telephone users on onesystem can send voice mail to a user on another VPIM-compliant system.For detailed information about VPIM and how to configure VPIM settings,see “Voice Profile for Internet Mail” on page 223To send a voice mail message to a user on another VPIM-compliantsystem, a telephone user first composes the voice mail message, usingthe commands in the user’s voice mailbox. Depending on how youconfigure the system’s dial plan, the telephone user can specify thedestination in two ways:■ If the dial plan is configured for site codes, the telephone userspecifies the destination site code followed by the extension of theperson for whom the voice mail message is intended.■ If the dial plan is configured without site codes, the telephone userspecifies the extension of the person for whom the message isintended. This requires that each site use a unique extension range fortelephones.A telephone user who knows the IP address of a VPIM-compliant voicemail system and the extension of a person who uses that system cancompose a voice mail message and then send it using these steps:1 Dial the IP address, pressing the * key after each field in the address,including the last field.2 Dial the extension of the person followed by # key.You must decide whether to use site codes or unique extension rangeswhen you configure the dial plan.Table Create 1 Internal 4 Digit Extensions/ ID Entry Digits Min Max Class Prio Route/ -- ----- ------ --- --- ------------ ---- -----TableEntry Create 1 3 9011 12 64 International 0 1/ Route Entry OperID Operation Value/ ----- ----- ------ --------- -----DestinationRouteOperation Create 3 2 1 stripLead 4
