410 CHAPTER 17: COUNTRY SETTINGSRegional Settings After you install regional software and components from the regionalpacks, you can enable regional settings. To enable these regional settingsin NetSet, you select the appropriate country and language for the systemvoice prompts, the technical tones and cadences, and the online userdocumentation.To enable regional settings, select Country Settings > Regional Settings.See the online Help for the procedure to enable regional settings.See “Third-Party Drivers” on page 368 for information about how toinstall regional language packs.Advanced Regional SettingsThe system also allows you to choose different regional settings for thesystem voice prompts, the technical tones and cadences, and the onlineuser (not administrator) documentation. For example, you might requirelocal tones and cadences but want the documentation to be in Englishand the voice prompts in Australian English.You can select separate regional settings for:■ Voice prompts — The Auto Attendant voice prompts.■ Documentation — The NBX Telephone Guide, the NBX NetSet userHelp, the LabelMaker utility, and the quick reference cards.■ Tones and Cadences — The tones and the patterns of rings (cadence)versus silence. Tones and cadences vary from country to country.Examples:■ United States ringing cadence (pattern) is 2 seconds of ringfollowed by 4 seconds of silence.Not Fully Installed The system can access some parts of the regional software,but not all. You might not have loaded the correct regionalsoftware version for the system software you are running.Error While Loading An error occurred while loading the regional software.Re-install the software.Nothing Installed The system is aware that this regional software exists, but noversion is installed.Table 78 Diagnostic Details (continued)Values Description
