3Com Router 3000 Ethernet FamilyConfiguration Guide Chapter 4 HWPing Configurations3Com Corporation4-16II. Configuration procedureNote:Steps 1 through 3 and 6 are required for a DHCP test and the remaining three steps areoptional.# Enable HWPing Client.[router] hwping-agent enable# Step 1: Create an HWPing test group, given an administrator name “administrator”and a test operations tag “dhcp”.[router] Hwping administrator dhcp# Step 2: Set the test type to DHCP.[router-hwping-administrator-dhcp] test-type dhcp# Step 3: Configure a source interface. This interface must be an Ethernet interface andthe tested DHCP Server must locate on the network attached to the interface.[router-hwping-administrator-dhcp] source-interface ethernet1/0/0# Step 4: Configure the maximum number of tests.[router-hwping-administrator-dhcp] count 10# Step 5: Configure a test timeout time.[router-hwping-administrator-dhcp] timeout 3# Step 6: Enable a test.[router-hwping-administrator-dhcp] test-enable# Step 7: View the test result.[router-hwping-administrator-dhcp] display hwping result administrator dhcp[router-hwping-administrator-dhcp] display hwping history administrator dhcp4.5.3 DLSw TestI. IntroductionDLSw test is used for testing the response time of a DLSw device.
