3Com Router 3000 Ethernet FamilyConfiguration Guide Chapter 6 MBGP Multicast Extension Configuration3Com Corporation6-12configuration, refer to the “IP Routing Policy” section in “Routing Protocol” of thismanual.6.2.14 Configuring MBGP Route FilteringThe route filtering configuration of MBGP is the same as that of unicast BGP.For the detailed configuration, refer to the “BGP Configuration" section in “RoutingProtocol” of this manual.6.2.15 Resetting BGP ConnectionsAfter changing the MBGP policy or protocol configuration, users must disconnect thepresent BGP connection to make the new configuration effective.For the detailed configuration, refer to the “BGP Configuration” section in “RoutingProtocol” of this manual.6.3 MBGP Display and DebugUpon the above configuration, execute the display commands in any view to displaythe running information of MBGP, and to verify the effect of the configuration.Execute the debugging command in user view for the debugging of MBGP.Table 6-16 Display and debug MBGPOperation CommandDisplay an MBGP routing table display bgp multicast routingip-addressDisplay in the BGP routing table theMBGP routes that match the specifiedAS path list.display bgp multicast routingas-path-acl as-path-aclDisplay CIDR (classless inter-domainrouting) display bgp multicast routing cidrDisplay the routing information about thespecified MBGP communitydisplay bgp multicast routingcommunity [ community-number |no-export-subconfed | no-advertise |no-export | whole-match ]Display the routes permitted by thespecified MBGP community listdisplay bgp multicast routingcommunity-list community-list-number[ whole-match ]Display the routes with inconsistentsource autonomous systemsdisplay bgp multicast routingdifferent-origin-asDisplay the routing information to orfrom a specified multicast neighbordisplay bgp multicast routing peerpeer-address { received | advertised }Display the routing informationadvertised by MBGP display bgp multicast network
