3Com Router 3000 Ethernet FamilyConfiguration Guide Chapter 3 v2.4x Basic Configurations3Com Corporation3-1Chapter 3 v2.4x Basic Configurations3.1.1 Entering/Exiting System ViewWhen logging onto the router from the console port, you enter user view and see theprompt <3Com> on the screen. To enter or exit system view, use the followingcommands.Table 3-1 Enter/exit system viewOperation CommandEnter system view from user view. system-viewReturn to user view from system view. QuitReturn to user view from any other view. ReturnWith the quit command, you can return to the previous view or exit the system fromuser view. The hot key is equivalent to the return command.3.1.2 Configuring the Router NameThe command prompt contains a router name that can be configured as needed.Perform the following command in system view.Table 3-2 Configure the router nameOperation CommandConfigure the router name sysname sysname3.1.3 Configuring the System ClockPerform the following configuration in system view.Table 3-3 Configure system clockOperation CommandSet the standard time. clock datetime time dateSet the time zone. clock timezone time-zone-name { add | minus } timeCancel the time zonesetting. undo clock timezone
