3Com Router 3000 Ethernet FamilyConfiguration Guide Chapter 2 System Maintenance Management3Com Corporation2-32.1.2 Manually Configuring auto-config on the RouterI. Enabling auto-configPerform the following configuration in system view.Table 2-1 Enable/disable auto-configOperation CommandEnable the auto-config feature auto-config enableDisable the auto-config feature undo auto-configBy default, the auto-config feature is enabled.II. Implementing the auto-config operationCaution:The auto-config operation runs a series of commands in batch and changes thecurrent configuration, but the undo command is not available. So it is usually used inbooting a router for the first time and caution should be taken in using it on alreadyconfigured networks.Although the auto-config function is available in the default configuration file “v2.41cfg.def”, you cannot save the configuration result of the auto-config command.Perform the following configuration in system view.Table 2-2 Implement the auto-config operationOperation CommandImplement the auto-config operation auto-configThe auto-config operation runs these commands in batch:1) Enabling FTP and configuring the VTY (Telnet) and TTY (through AM interface)users to adopt the local authenticationftp server enableuser-interface vty 0 4authentication-mode schemeuser-interface tty user-interface-number
