3Com Router 3000 Ethernet FamilyConfiguration Guide Chapter 2 User Configuration Interface3Com Corporation2-202.3.2 Usage of the Hot Keysz You can press a combined hot key wherever you are allowed to enter a command.The system will then display the corresponding command as if you had enteredthe complete command.z If you have input part of a command without pressing , you can delete theinput characters and enter a complete command simply by pressing the hot key forthis new command.z Similar to executing a command, after a hot key is executed its correspondingcommand prototype is retained in the history command buffer and log for retrieveand problem addressing.Note:The function of a hot key may be restricted by its definition on the user terminal. If thesame hot key is associated with different functions on the IP PBX and the user terminal,it is to be captured by the terminal program when executed and as such, cannotexecute the associated command line on the router.Perform the following configuration in system view.Table 2-10 Define hot keysOperation CommandDefine a hot key. hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T |CTRL_U ] command_textRestore the defaultvalues in the system.undo hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T |CTRL_U ]By default, the system assigns defaults to the hot keys of CTRL_G, CTRL_L andCTRL_O as follows:CTRL_G: display current-configurationCTRL_L: display ip routing-tableCTRL_O: undo debugging allThe default values of the other two hot keys are void by default.Perform the following configuration in any view.Table 2-11 Display the hot keys and their functionsOperation CommandDisplay the hot keys and their functions. display hotkey
