display aaa 181user NinPassword = 082c6c64060b (encrypted)Filter-Id = acl-999.inFilter-Id = acl-999.outuser last-resort-guestssidVlan-Name = k2user last-resort-anyVlan-Name = foomac-user 01:02:03:04:05:06usergroup eastcoasterssession-timeout = 99Table 38 describes the fields that can appear in display aaa output.Table 38 display aaa OutputField DescriptionDefault Values RADIUS default values for all parameters.authport UDP port on the WX switch for transmission of RADIUSauthorization and authentication messages. The defaultport is 1812.acctport UDP port on the WX switch for transmission of RADIUSaccounting records. The default is port 1813.timeout Number of seconds the WX switch waits for a RADIUSserver to respond before retransmitting. The default is5 seconds.acct-timeout Number of seconds the WX switch waits for a RADIUSserver to respond to an accounting request beforeretransmitting. The default is 5 seconds.retrans Number of times the WX switch retransmits a messagebefore determining a RADIUS server unresponsive. Thedefault is 3 times.deadtime Number of minutes the WX switch waits after determininga RADIUS server is unresponsive before trying to reconnectwith this server. During the dead time, the RADIUS serveris ignored by the WX switch. The default is 0 minutes.key Shared secret key, or password, used to authenticate to aRADIUS server. The default is no key.author-pass Password used for outbound authentication to a RADIUSserver, used in conjunction with a last-resort username. Bydefault, a MAC user’s MAC address is also used as thatuser’s password, and no global password is set.Radius Servers Information about active RADIUS servers.
