display service-profile 259WEP Key 1 value State of static WEP key number 1. Radios can use this key toencrypt traffic with static Wired-Equivalent Privacy (WEP):■ none —T he key is not configured.■ preset — The key is configured.Note: The WEP parameters apply to traffic only on theencrypted SSID.WEP Key 2 value State of static WEP key number 2:■ none — The key is not configured.■ preset — The key is configured.WEP Key 3 value State of static WEP key number 3:■ none — The key is not configured.■ preset — The key is configured.WEP Key 4 value State of static WEP key number 4:■ none — The key is not configured.■ preset — The key is configured.WEP Unicast Index Index of the static WEP key used to encrypt unicast traffic onan encrypted SSID.WEP Multicast Index Index of the static WEP key used to encrypt multicast trafficon an encrypted SSID.Shared Key Auth Indicates whether shared-key authentication is enabled.WPA enabled Indicates that the Wi-Fi Protected Access (WPA) informationelement (IE) is enabled. Additional fields display the settingsof other WPA parameters:■ ciphers — Lists the WPA cipher suites advertised byradios in the radio profile mapped to this service profile.■ authentication — Lists the authentication methodssupported for WPA clients:802.1X — dynamic authenticationPSK — preshared key authentication■ TKIP countermeasures time — Indicates the amount oftime (in ms) MSS enforces countermeasures following asecond message integrity code (MIC) failure within a60-second period.Note: The WPA fields are displayed only when the WPA IE isenabled.Table 56 Output for display service-profile (continued)Field Description
