display spantree statistics 329config_pending Indicates whether a configured BPDU is to be transmittedon expiration of the hold timer for the port.port_inconsistency Indicates whether the port is in an inconsistent state.config BPDU’s xmitted Number of BPDUs transmitted from the port. A number inparentheses indicates the number of configured BPDUstransmitted by the WX switch for this VLAN’s spanningtree.config BPDU’s received Number of BPDUs received by this port. A number inparentheses indicates the number of configured BPDUsreceived by the WX switch for this VLAN’s spanning tree.tcn BPDU’s xmitted Number of topology change notification (TCN) BDPUstransmitted on this port.tcn BPDU’s received Number of TCN BPDUs received on this port.forward transitioncountNumber of times the port state transitioned to theforwarding state.scp failure count Number of service control point (SCP) failures.root inc trans count Number of times the root bridge changed.inhibit loopguard State of the loop guard. In the current release, the state isalways FALSE.loop inc trans count Number of loops that have occurred.forward delay timer Status of the forwarding delay timer. This timer monitorsthe time spent by a port in the listening and learningstates.forward delay timervalueCurrent value of the forwarding delay timer, in seconds.message age timer Status of the message age timer. This timer measures theage of the received protocol information recorded for aport.message age timervalueCurrent value of the message age timer, in seconds.topology change timer Status of the topology change timer. This timer determinesthe time period during which configured BPDUs aretransmitted with the topology change flag set by this WXswitch when it is the root bridge, after detection of atopology change.topology change timervalueCurrent value of the topology change timer, in seconds.Table 62 Output for display spantree statistics (continued)Field Description
