display {ap | dap} status 245Table 49 Output for display ap statusField DescriptionDAP Connection ID for the Distributed MAP.Note: This field is applicable only if the MAP is configured onthe WX switch as a Distributed MAP.Port WX port number.Note: This field is applicable only if the MAP is directlyconnected to the WX switch and the WX switch’s port isconfigured as an MAP access port.IP-addr IP address of the MAP. The address is assigned to the MAPby a DHCP server.Note: This field is applicable only if the MAP is configured onthe WX switch as a Distributed MAP.AP model MAP access point model number.manufacturer Company that made the MAP access point.name MAP access point name.Link Status of this link with the MAP access point and the MAPport at the other end of the link. The status can be up ordown.MAP port MAP port number connected to this WX port.State State of the MAP:■ init — The MAP has been recognized by the WX but hasnot yet begun booting.■ booting — The MAP has asked the WX for a bootimage.■ image downloading — The MAP is receiving a bootimage from the WX.■ image downloaded — The MAP has received a bootimage from the WX and is booting.■ configuring — The MAP has booted and is ready toreceive or is already receiving configuration parametersfrom the WX.■ operational — The MAP has received configurationparameters for one or more radios and is ready to acceptclient connections.■ configure failure — One or more of the radioparameters received from the WX is invalid.CPU info Specifications and identification of the CPU.For MAP models MP-352, MP-341, and MP-52, the IDportion of this field is not applicable.
