3Com 6416SW Installation And User Manual

Setting the LECS ATM AddressTo set the ATM address of the LAN emulation configuration server (LECS) enter theSET LAN_EMUL CONFIGURATION_SERVER command. This is to support LECswhich get their associated LES ATM address from a LECS. LECs have three possibleways to establish a connection to the LECS:During ILMI, the LEC gets the unicast ATM address that is available from the ILMIMIB (atmSrvcATMAddress). LECS ATM addresses can be defined to be returnedto the LEC during ILMI exchange. These LECS ATM addresses must be defined inall ATM switches that deal with LECs requesting the LECS ATM address from theILMI MIB.The LEC connects to the LECS using the well known address. You can define anLECS ATM address to be substituted by the well known address. This addressmust be defined in all ATM switches that are dealing with LEC connection requestsreferring to the well known address.The LEC connects to the LECS using a fixed PVC with vpi.vci equal to 0.17.When defining a PVC for virtual channel connection (VCC), the allowed range forVCI values includes the value 17.@ONcoreATM>set lan_emul configuration_server active_wka|inactive_wkaONcoreATM>Enter ATM address: 39.99.99.99.99.99.99. . .99.99. 1. 2. .8 . 5.A9.92.9F. [ENTER]Entry set.ONcoreATM>5-23