3Com 6416SW Installation And User Manual

Setting 6416SW PasswordsIt is necessary to set two levels of 6416SW passwords:Administrator password that provides access to all 6416SW commands withread-write (configuration) accessUser password that provides access to a subset of 6416SW commands includingmost SHOW commands, PING and TELNET.See theONcore Switching Hub/CELLplex 4000 ATM Command Reference Guide formore information on access to 6416SW commands.Administrator Password1. At the console prompt, type the SET DEVICE PASSWORD ADMINISTRATORcommand:@ONcoreATM> set device password administratorThen press Enter.2. In the next three fields displayed, enter your current password and the newpassword (up to fifteen characters) twice as shown below. For security purposes,the values you enter are not displayed on the screen.@Enter current administrator password: {old password}New password: {new password}Re-enter password: {new password}Then press Enter. You are prompted when your password is accepted:@Password changed.3. To save your new password, type the SAVE DEVICE or the SAVE ALL command:5-6 ONcore ATM Switch/Control Module: Installation and User's Guide