2-6Function menu Description User levelSave Save the current configuration to the configurationfile to be used at the next startup. ConfigureInitialize Restore the factory default settings. ConfigureFileManagementFileManagementManage files on the device, such as displaying thefile list, downloading a file, uploading a file, andremoving a file.ManagementSummary Display port information by features. MonitorDetail Displays feature information by ports. MonitorPortManagement Setup Create, modify, delete, and enable/disable a port,and clear port statistics. ConfigureSummary Display the configuration information of a portmirroring group. MonitorCreate Create a port mirroring group. ConfigureRemove Remove a port mirroring group. ConfigurePortMirroringModify Port Configure ports for a mirroring group. ConfigureSummary Display the brief information of FTP and Telnetusers. MonitorSuperPasswordConfigure a password for a lower-level user toswitch from the current access level to themanagement level.ManagementCreate Create an FTP or Telnet user. ManagementModify Modify FTP or Telnet user information. ManagementRemove Remove an FTP or a Telnet user. ManagementUsersSwitch ToManagementSwitch the current user level to the managementlevel. VisitorLoopback Loopback Perform loopback tests on Ethernet interfaces. ConfigureVCT VCT Check the status of the cables connected toEthernet ports. ConfigurePort TrafficStatisticsDisplay the average rate at which the interfacereceives and sends packets within a specified timeinterval.MonitorFlowInterval IntervalConfigurationSet an interval for collecting traffic statistics oninterfaces. ConfigureStormConstrainStormConstrainDisplay and set the interval for collecting stormconstrain statistics.Display, create, modify, and remove the port trafficthreshold.ConfigureStatistics Display, create, modify, and clear RMON statistics. ConfigureHistory Display, create, modify, and clear RMON historysampling information. ConfigureRMONAlarm View, create, modify, and clear alarm entries. Configure