3Com Baseline 2928 PWR Plus User Manual

Also see for 2928 - Baseline Plus Switch PWR: Datasheet Datasheet Datasheet Datasheet Datasheet

Contents

1-16After the above configuration, make sure that the system clock of the Switch is synchronous to that ofthe CA, so that the Switch can request certificates and retrieve CRLs properly.2) Configure Switch# Create a PKI entity.z Select Authentication > PKI from the navigation tree. The PKI entity list page is displayed bydefault. Click Add on the page, as shown in Figure 1-16, and then perform the followingconfigurations as shown in Figure 1-17.Figure 1-16 PKI entity listFigure 1-17 Configure a PKI entityz Type aaa as the PKI entity name.z Type ac as the common name.z Click Apply.# Create a PKI domain.z Select the Domain tab, and then click Add, as shown in Figure 1-18, and then perform thefollowing configurations as shown in Figure 1-19.