1-12Item DescriptionLink Aggregation Select to include the link aggregation TLV in transmittedLLDPDUs.MAC/PHYConfiguration/StatusSelect to include the MAC/PHY configuration/status TLV intransmitted LLDPDUs.Maximum FrameSizeSelect to include the maximum frame size TLV intransmitted LLDPDUs.DOT3 TLVSettingPower via MDI Select to include the power via MDI TLV in transmittedLLDPDUs.LLDP-MEDCapabilitiesSelect to include the LLDP-MED capabilities TLV intransmitted LLDPDUs.InventorySelect to include the hardware revision TLV, firmwarerevision TLV, software revision TLV, serial number TLV,manufacturer name TLV, model name TLV and asset IDTLV in transmitted LLDPDUs.Network Policy Select to include the network policy TLV in transmittedLLDPDUs.ExtendedPower-via-MDICapabilitySelect to include the extended power-via-MDI TLV intransmitted LLDPDUs.Emergency NumberSelect to encode the emergency call number in thelocation identification TLV in transmitted LLDPDUs and setthe emergency call number.AddressMED TLVSettingNetwork DeviceAddressSelect Address to encode the civic address information ofthe network connectivity device in the locationidentification TLV in transmitted LLDPDUs. In addition, setthe device type, which can be a DHCP server, switch orLLDP-MED endpoint, country code, and network deviceaddress.When configuring the network device address, select theaddress information type from the dropdown list, type theaddress information in the text box below and click Addnext to the text box to add the information to the addressinformation list below. To remove an address informationentry, select the entry from the list, and click Delete. Thecivic address information can include language,province/state, country, city, street, house number, name,postal/zip code, room number, post office box, and ifnecessary, additional information.Return to LLDP Configuration Task List.Configuring Global LLDP SetupSelect Network > LLDP from the navigation tree and click Global Setup tab to enter the page shown inFigure 1-7.