3-6Logging In to the CLIThe login process requires a user name and password. The default user name for first timeconfiguration is admin, no password is required. User names and passwords are case sensitive.To logon to the CLI Interface:Step1 Press Enter. The Username prompt displays:Login authenticationUsername:Step2 Enter your User Name at the Username prompt.Username:adminStep3 Press Enter. The Password prompt displayPassword:The login information is verified, and displays the following CLI menu:<3Com Baseline Switch>If the password is invalid, the following message appears and process restarts.% Login failed!CLI CommandsThis Command section contains the following commands:To do… Use the command…Displays a list of CLI commands on the device ?Reboot the device and run the default configuration initializeSpecify VLAN-interface 1 to obtain an IP addressthrough DHCP or manual configurationipsetup { dhcp | ip address ip-address{ mask | mask-length } [ default-gatewayip-address ] }Modify the login password of a user passwordDownload the Boot ROM program or boot file from theTFTP server and specify it to be used at the next startupupgrade server-address source-filename{ bootrom | runtime }Reboot the device and run the main configuration file rebootView the summary information of the device summaryPing a specified destination ping hostinitializeSyntaxinitializeParametersNone
