1-4Task RemarksConfiguring an SNMP Community RequiredConfiguring SNMP Trap FunctionOptionalAllows you to configure that the agent can send SNMP trapsto the NMS, and configure information about the target hostof the SNMP traps.By default, an agent is allowed to send SNMP traps to theNMS.Configuring SNMPv3Perform the tasks in Table 1-2 to configure SNMPv3:Table 1-2 SNMPv3 configuration task listTask RemarksEnabling SNMP RequiredThe SNMP agent function is disabled by default.Configuring an SNMP ViewOptionalAfter creating SNMP views, you can specify an SNMP view foran SNMP group to limit the MIB objects that can be accessed bythe SNMP group.Configuring an SNMP GroupRequiredAfter creating an SNMP group, you can add SNMP users to thegroup when creating the users. Therefore, you can realizecentralized management of users in the group through themanagement of the group.Configuring an SNMP UserRequiredBefore creating an SNMP user, you need to create the SNMPgroup to which the user belongs.Configuring SNMP Trap FunctionOptionalAllows you to configure that the agent can send SNMP traps tothe NMS, and configure information about the target host of theSNMP trapsBy default, an agent is allowed to send SNMP traps to the NMS.Enabling SNMPSelect Device > SNMP from the navigation tree to enter the SNMP configuration page, as shown inFigure 1-4. On the upper part of the page, you can select to enable or disable SNMP and configureparameters such as SNMP version; on the lower part of the page, you can view the SNMP statistics,which helps you understand the running status of the SNMP after your configuration.