1-7Task RemarksConfiguring LLDPSettings on PortsOptionalLLDP settings include LLDP operating mode, packet encapsulation, CDPcompatibility, device information polling, trapping, and advertised TLVs.By default,z The LLDP operating mode is TxRx.z The encapsulation format is Ethernet II.z CDP compatibility is disabled.z Device information polling and trapping are disabled.z All TLVs except the Location Identification TLV are advertised.Configuring GlobalLLDP SetupRequiredBy default, global LLDP is disabled.To enable LLDP to work on a port, enable LLDP both globally and on theport.Displaying LLDPInformation for a PortOptionalYou can display the local LLDP information, neighbor information,statistics, and status information of a port, wherez The local LLDP information refers to the TLVs to be advertised by thelocal device to neighbors.z The neighbor information refers to the TLVs received from neighbors.Displaying Global LLDPInformationOptionalYou can display the local global LLDP information and statistics.Displaying LLDPInformation Receivedfrom LLDP NeighborsOptionalYou can display the LLDP information received from LLDP neighbors.LLDP-related configurations made in Ethernet interface view takes effect only on the current port, andthose made in port group view takes effect on all ports in the current port group.Enabling LLDP on PortsSelect Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in Figure 1-4.This tab displays the enabling status and operating mode of LLDP on a port. Select one or more portsand click Enable beneath the port list to enable LLDP on them.To disable LLDP on a port, select the port and click Disable.