2-12 Configuration Through the Web InterfaceWeb-Based Network Management Operating Environment3Com provides the Web-based network management function to facilitate the operations andmaintenance on 3Com’s network devices. Through this function, the administrator can visually manageand maintain network devices through the Web-based configuration interfaces.Figure 2-1 shows a Web-based network management operating environment.Figure 2-1 Web-based network management operating environmentLogging In to the Web InterfaceDefault Login InformationThe device is provided with the default Web login information. You can use the default information to login to the Web interface.Table 2-1 The default Web login informationInformation needed at login Default valueUsername adminPassword NoneIP address of the device (VLAN-interface 1) Default IP address of the device, depending on thestatus of the network where the device resides.1) The device is not connected to the network, or no DHCP server exists in the subnet where thedevice residesIf the device is not connected to the network, or no DHCP server exists in the subnet where the deviceresides, you can get the default IP address of the device on the label on the right of the device rearpanel, as shown in Figure 2-2. The default subnet mask is 255.255.0.0.
