3Com Baseline 2928 PWR Plus User Manual

Also see for 2928 - Baseline Plus Switch PWR: Datasheet Datasheet Datasheet Datasheet Datasheet

Contents

1-10Figure 1-6 The page for modifying LLDP settings on ports in batchTable 1-8 describes the port LLDP configuration items.Table 1-8 Port LLDP configuration itemsItem DescriptionInterface Name Displays the name of the port or ports you are configuring.DLDP StateDisplays the LLDP enabling status on the port you areconfiguring.This field is not available when you batch-configure ports.LLDP OperatingModeSet the LLDP operating mode on the port or ports you areconfiguring. Available options include:z TxRx: Sends and receives LLDPDUs.z Tx: Sends but not receives LLDPDUs.z Rx: Receives but not sends LLDPDUs.z Disable: Neither sends nor receives LLDPDUs.Basic SettingsEncapsulationFormatSet the encapsulation for LLDPDUs. Available optionsinclude:z ETHII: Encapsulates outgoing LLDPDUs in Ethernet IIframes and processes an incoming LLDPDU only if itsencapsulation is Ethernet II.z SNAP: Encapsulates outgoing LLDPDUs in Ethernet IIframes and processes an incoming LLDPDU only if itsencapsulation is Ethernet II.LLDP-CDP PDUs use only SNAP encapsulation.