4.4.2 Replacement of turning diskLocation of turning diskThe turning disk is located at the frontmost part of the robot, as shown in the figurebelow.A more detailed view of the component and its position may be found in sectionTilthouse, exploded view on page 256 in part 2 of the Product manual.xx0500001938Turning diskAAttachment screws and o-rings, turning disk (6 pcs)BRequired equipmentNoteArt. no.Spare part no.Equipment3HAC023881-001Turning diskReplace if damaged.3HAB3772-16O-ring6 pcs; one o-ring at each at-tachment screw. Replace ifdamaged.3HAB3772-89O-ringLoctite 243-Locking liquidThe content is defined in thesection Standard tools onpage 225.-Standard toolkitComplete kit that also in-cludes operating manual.3HAC15716-1Calibration PendulumtoolkitContinues on next page140 3HAC026048-001 Revision: E© Copyright 2006-2013 ABB. All rights reserved.4 Repair4.4.2 Replacement of turning disk