Select Line draw iconfrom toolbar to drawlines between symbolsGUID-795A6797-D4D9-4705-A496-C3FBD771C211-ANSI V1 ENFigure 56: Graphical Display Editor: drawing a line between symbols4. Draw all the necessary line elements.5. To finish the line drawing, click Select on the menu bar.6.1.2 Bay configuration engineeringA view with a single-line diagram and measurements contains active living objects.The object values are updated by the IED periodically (measurement) or in case of anevent.Once the symbols are placed on the HMI page, they must be linked to thecorresponding function block in the application configuration, which protects orcontrols the object that the symbol on the HMI page represents.1MRS240044-IB A Section 6LHMI engineeringREF615R 93Engineering Manual
